Stihl Power MS 192 C-E / NOT AVAILABLE

No Image Available
No Image Available

 

Features

  • Built in the USA

Indicates products that are built in the United States from domestic and foreign parts and components.

  • STIHL Easy2Start™ (E)

The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.

  • IntelliCarb™ Compensating Carburetor

The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.

  • Purge Pump Primer

The purge pump primer feature enables the user to prime the carburetor with fuel, enabling easier starting. The purge pump primer is designed in a way that the operator cannot flood the machine by priming the carburetor too many times. Flooding the engine is still possible if the choke is not removed after the engine turns over.

  • Side-Access Chain Tensioner

The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.

  • Toolless fuel and oil caps with retainers

Simply lift the lever and twist the caps to remove or tighten. There‘s no need to use a tool to tighten or loosen.

Specifications

DISPLACEMENT 30.1 cc (1.8 cu. in.)
ENGINE POWER 1.3 kW (1.7 bhp)
POWERHEAD WEIGHT 3.3 kg (7.4 lbs.)
GUIDE BAR LENGTHS* (Recommended ranges) 30 to 40 cm (12" to 16")
FUEL CAPACITY 270 cc (9.1 oz.)
CHAIN OIL CAPACITY 220 cc (7.4 oz.)
OILOMATIC® CHAIN 3/8" PMM3
POWER SOURCE Gas

Would you like more information?