New Holland C314

Ditch the shovel and wheelbarrow and all the hard manual labor that goes with them. The New Holland C314 mini track loader is all the equipment you need to get more done. The C314’s big operating capacity adds more jobs to your residential construction and landscaping checklist. And its narrow working width gets you in and out of tight spots with ease.Power and versatility are a formidable combination in a C314:

•  1,000 lbs. of rated operating capacity—easily handles  lift-and-carry operations

•  Common industry interface and 14-pin electric multifunction control—offers greater versatility  with new and older attachments

•  Wide range of attachments—power New Holland augers, trenchers, grapple buckets, rakes, and more

Tackling multiple projects with one machine

The C314 mini track loader, with 25 horsepower, enables the operator to become a jack-of-all-trades with its ability to adapt to the job ahead. The machine can be used for a variety of projects. From paving patios and walkways, to moving cut pieces of brush, trees and shrubs, to completing light-duty construction work like erecting foundations and decks.

Paired with an extensive list of loader attachments that can be used with the machine, the new C314 mini track loader has the versatility to dig, load, drill and more. The new machine is compatible with New Holland Construction’s suite of 29 attachments and is enabled to operate this wide range of attachments due to its auxiliary flow rate of 15 gallons per minute. Thanks to its approximately 1,000-pounds rated operating capacity (at 35 percent of tipping load) and 35 inches of working space, operators are able to power through mild structural projects, like laying footings for a small building, fence line work and irrigation or drainage tasks. It also offers optimal dump height for easy loading.

OPERATING WEIGHT

• Narrow Track (NT) 2X Counterweights (STD): 3,536 lb (1 604 kg)
• Wide Track (WT) 6X Counterweight (OPT): 3,783 lb (1 716 kg)

DRIVETRAIN

• Transmission Type Hydrostatic Max.
• Travel speed 4.7 mph (7.5 kph)
• Parking brake: Type SAHR pin brake

SERVICE CAPACITIES

• Fuel Tank 7.9 gal (30 L)
• Engine oil w/ filter 6.0 qt (5.7 L)
• Hydraulic system 4.5 gal (17 L)
• Engine Coolant 0.9 gal (3.5 L)

DIMENSIONS

• Overall Height 56.5 in (1 435 mm)
• Overall Length: Without Bucket 85.6 in (2 175 mm)
• Machine Width: Narrow Track Wide Track 35.0 in (890 mm) 40.4 in (1 026 mm)
• Bucket Width: Narrow Track Wide Track 36.0 in (914 mm) 42.0 in (1 067 mm)

LOADER PERFORMANCE SPECS

• Lift Geometry Radial Lift Narrow Track Rated operating capacity – ROC*:
• 35% of tipping load 50% of tipping load 992 lb (450 kg) 1,416 lb (643 kg)
• Narrow Track Tipping load* 2,833 lb (1 285 kg)
• Wide Track Rated operating capacity – ROC*:
• 35% of tipping load 50% of tipping load 1,102 lb (500 kg) 1,574 lb (714 kg)
• Wide Track Tipping load* 3,148 lb (1 428 kg)

ENGINE

• Model Kubota D1305-E4B
• Emissions Certification Stage V
• Cylinders 3
• Displacement 77.0 in3 (1.261 L)
• Fuel Diesel
• Exhaust after treatment N/A
• Engine speeds Rated – full load RPM 2600
• Horsepower @ 2600 RPM – SAE J1349:
• Gross Net 24.8 hp (18.5 kW) 24 hp (18.0 kW)
• Peak torque @ 1700 RPM 59.1 lb·ft (80.1 N·m)

ELECTRICAL

• System Voltage 12 Volts
• Alternator 60 amp
• Battery 62 AHR 540 cold-cranking amps @ 0° F (-18° C°)

HYDRAULICS

• Implement pump-type Fixed Gear
• Displacement 1.2 in3 (19 cm3)
• Standard flow @ rated engine RPM: @ 100% efficiency 13.2 gpm (50 L/min)
• Loader control valve: Type Open center
• Implement Hydraulics Operating Pressure: 2,800 psi (190 bar)

SERVICE CAPACITIES

• Fuel Tank 7.9 gal (30 L)
• Engine oil w/ filter 6.0 qt (5.7 L)
• Hydraulic system 4.5 gal (17 L)
• Engine Coolant 0.9 gal (3.5 L)