Pettibone Extendo 1530
Extendo Extendo 1530
Overview:
Heavy-duty lift cylinders, automatic fork leveling and rear axle stabilization make the Extendo 1530 telehandler a must-have machine for operators tackling big loads.
Features
Engine
The 1530 is powered by a 130-HP Cummins Tier 3 turbo diesel engine with full electronic control and protection.
Transmission
Modulated Dana Powershift transmission, with 4-speed forward and 3-speed reverse with declutch, allows for safe deceleration before shifting gears.
Axles
Outboard planetary axles with oil-immersed, inboard service and parking brakes offer enhanced reliability.
Lift Cylinders
Two wide-stance, heavy-duty lift cylinders are slightly angled toward the center line of the chassis to triangulate the overall alignment. This keeps the boom centered as it elevates.
Rear Axle Stabilization
The rear axle stabilization system slows and locks the rear axle oscillation for enhanced stability as the boom is raised.
Sway Cylinder
Provides 20 degrees of fork leveling (10 degrees right and left of center).
Fork Leveling
The 1530 provides automatic fork leveling without needing slave cylinders.
Reach
Achieves forward reach up to 17 feet, 5 inches and a maximum lift height of 30 feet.
Hydraulics
Pressure compensated hydraulic system and auxiliary boom tip hydraulics give operators the flexibility to use multiple hydraulic functions at once. Single joystick, pilot operated control covers all boom functions.
Quick Connect
Easily switch between standard fork carriage and other attachments.
Steering
4-wheel drive with 2-wheel, 4-wheel and crab hydraulic power steering modes provides agility in tight spaces.
Turning Radius
Turning radius of 16 feet allows for more efficient operation.
Ground Clearance
Provides excellent ground clearance of 21 inches.
Tires
Standard 16.00 x 24 pneumatic tires offer 16 ply rating for durability on any terrain.
Operator Cab
Protected by ROPS/FOPS, the cab includes an entry step, adjustable suspension seat with seat belt, adjustable right-side armrest, machine level indicator, and a full set of gauges for instant machine status.
Specifications
| DIMENSIONS - | |
| Overall Height | 9' 5" (287 cm) boom down |
| Fork Carriage | 72" (183 cm) standard |
| Ground Clearance | 21" (53 cm) |
| Overall Length | 22' 7" (688 cm) to fork frame |
| Overall Width | 8' 6" (259 cm) |
| Pallet Forks | 2.25 x 6 x 48" standard |
| Total Operating Weight | 31,520 lbs (14,298 kg) |
| ENGINE - | |
| Model/Power | 130 HP (97 kW) Cummins Tier III turbo diesel with electronic control and protection |
| Fuel Tank | 32.6 gal. (123 L) |
| HYDRAULICS - | |
| System | Pressure comp, axial piston |
| Features | Auxiliary boom tip hydraulics Quick disconnect for attachments |
| Controls | Single joystick, pilot operated |
| PERFORMANCE - | |
| Max Load Capacity | 15,433 lbs (7,000 kg) |
| Maximum Lift Height | 30' (914 cm) |
| Maximum Forward Reach | 17' 5" (531 cm) |
| Below Grade Reach | 15" (38 cm) with boom extended |
| Maximum Travel Speed | 20 mph (32 km/h) |
| Turning Radius | 16' (488 cm) |
| Frame | 20° of leveling (10° right and left) |
| Rear axle stabilization system | |
| Transmission | Modulated Dana Powershift, 4-speed forward & 3-speed reverse with declutch |
| Axles | Dana outboard planetary; 4-wheel drive |
| Steering | 4 wheel, 2 wheel, and crab steer |
| Brakes | Oil-immersed inboard disc service brakes, integral park brake |
| Tires | 16.00 x 24, 16 ply |
| Boom | Automatic fork leveling without slave cylinders 2 wide stance, heavy-duty lift cylinders |
Would you like more information?