Husqvarna PG 680 RC

Double tap to zoom



Increased productivity with remote control

Higher output as optimum grinding parameters can be maintained over time. More grinding hours per day since you can operate and prepare next steps simultaneously. For example you can apply GM 3000 with a broom at the same time as you run the machine.

Unique function for flatter floors

Replication of manual grinding movements (oscillation), gives best possible grinding pattern by adjusting amplitude and frequency. Gives a flatter floor by eliminating so called ridges otherwise created between passes. At the same time, the oscillation function saves time for the operator, as you only have to go over the floor once with the machine, instead of using the cross hatching technique.

Dual Drive Technology™

Dual Drive Technology™ – fully independent control of both planetary and satellite grinding heads in regards to speed and direction of rotation.

Consistent optimum grinding performance

Parameter settings enables optimum grinding and polishing for each application. Consistent operation and result, even when changing operator.


Rated input power 17.5 hp
Rated current 23 A
Voltage 380-480 V
Phases 3 ph
Pins 3-pin
Frequency 60 Hz
Grinding width 27 in
Grinding disc diameter 9 in
Grinding disc speed min 300 rpm
Grinding disc speed max 1200 rpm
Grinding pressure, max 606 lbs
Planetary head speed max 5-65 rpm
Direction of rotation Independent FWD/REV direction control on both grinding discs and planetary head.
Number of grinding discs 3
Product size length 50 in
Weight 1102 lbs

Would you like more information?