Blount International 2484C

Double tap to zoom

 

Features

Powerful System

The custom-engineered hydraulic system forms the heart of the C Series. The system is designed for fast cycle times, smooth operation and maximum reliability in delimbing and loading operations.

Hydraulic Pump is Powerful, Responsive, and Quiet

Designed for continuous, efficient and reliable operation, the loader’s axial piston hydraulic pump meets stringent requirements for noise, efficiency, controllability and durability.

Semi-monoblock Valve System

The valve system has proven reliability in forestry applications with its fuel-efficient negative control system providing precise control of individual functions. Each section is tuned for optimized flow and pressure of the function, therefore increasing machine functionality and fuel efficiency.

Operating Modes

Three operating modes allow the operator to tailor the machine’s performance to match the job requirements. The “economy” mode provides the best combination of fuel efficiency and performance; an intermediate “run” position provides additional flow capabilities when higher production is required, and a “power” mode allows the full potential of the machine to come on-line to handle large timber and the heaviest delimbing requirements. All of the operating modes provide the best multifunction ability, function response, control and fast cycle times.

Automated Control System

The Cat ECM provides best in class diagnostics, operator setup capability, and adjustment of attachment flows.

Electric Hydraulic Oil Fill Pump

The hydraulic oil sight gauge makes it easy to know when oil needs to be added. Adding hydraulic oil is fast and easy with the on-board service hose and electric fill pump. Hydraulic oil is pumped through the filtering system and into the tank, maintaining cleanliness requirements.

Enhanced Entry

System The walk up platform includes skid resistant deck and stair components. An enlarged doorway provides easy cab entry.

Front Window Guard

The HD front window guard provides an extra level of protection while handling large trees and building high wood piles.

Clear Visibility

The reverse slope front window stays clean while accumulated moisture and dust can be removed with the front window wiper/washer

High Back Comfort Seat

The suspension seat features lumbar support and headrest that provide optimum comfort. Armrests are adjustable and cupped for better arm support.

Ergonomic Machine

Controls Hydraulic pilot actuated joystick controls with foot pedal swing for easy operator control of all functions.

Climate Controlled Cab

A high capacity air conditioning and heater system includes channeled air flow to louvered vents for full coverage of the operator and defrosting/defogging of windows.

Molded Consoles and Headliner

The molded console with storage trays eliminates cab clutter. The headliner helps reduce noise in the cab and houses HVAC louvers that allow the operator to adjust air flow. Two 12-volt power points and a factory installed CB mounting bracket, antenna cable, and power harness provide flexibility for additional electric and electronic equipment.

Cat C6.6 ACERT Engine

The Cat C6.6 engine with ACERT Technology gives exceptional power and fuel efficiency while meeting U.S. Environmental Protection Agency (EPA) Tier 4 Interim, EU Stage IIIB emission standards. This engine includes electronic governing, cold mode start strategy, automatic altitude compensation, electronic diagnostics and fault monitoring.

Exceptional Cooling Capability

An enlarged side by side engine coolant, hydraulic, and charge air cooling package allows efficient heat rejection. Individually isolated cooling cores eliminating core to core thermal stresses to greatly increase durability.

Speed Modulated Viscous Fan The large 864 mm (34 in) diameter electronically controlled variable speed fan is speed modulated to provide cooling only as required, resulting in reduced noise levels and lower fuel consumption.

Information Display A premium gauge cluster includes LED indicators and a digital display which provides information about machine operation, control activation, system diagnostics and operator adjustable settings.

Solid State Controls

Standard industry relays are replaced by solid state controls in high cycle applications to provide substantially longer service life.

Performance

High swing torque, swing speed and lift capacity of Prentice knuckle boom loaders reduce cycle times and lower cost per ton.

Durability

The heavy-duty structures of these loaders makes them the right choice for high production, high cycle applications or when handling big hardwoods. The rugged upper frame includes cross plate head side reinforcement for severe delimbing applications.

Subframe Design

Simple, clean and engineered for long life providing a rock solid base for optimum stability.

Stabilizers Wide

stance stabilizer legs and cylinder mounted lock valves resist side pulling and provide 360-degree stability for heavy lifting.

Durability

Reliable, heavy-duty booms increase uptime and reduce repair costs.

Strength

The main booms are constructed in a box design with thick walls and strong welds

Cast Pin

Points The ends and middle of the main booms are cast, which is stronger and lighter than fabricating.

Steel Tube Lines

Steel tube hydraulic lines provide extended life and effectively dissipate heat

High Tensile Steel

Grapple jaws are constructed of special high-tensile wear resistant steel. Critical areas of the jaws are reinforced and designed to protect the cylinder rods and hoses.

Optimum Configurations

Cylinder size and jaw configuration provide holding forces for large multi-stem loads as well as the ability to handle single logs.

Rounded Jaw Tips

Rounded jaw tips minimize damage to individual logs.

Heavy-duty Rotators

Heavy-duty rotators include high-pressure swivels for demanding applications. Each head assembly is constructed of high-tensile steel with heavy-duty bearings and hardened gears.

Ground Level Filter Access

Easy changing of engine, fuel, pilot and case drain filters.

Outer-Tank Capsule Filter Assembly

Eliminates contamination backflow during filter changes.

Eco-Valves

Allows capturing of fluids for easy draining without spillage

Easy Fluid Changes

An electric refill pump to add oil into the hydraulic tank maintains system cleanliness by passing all oil through the filtering system.

Electric Fuel Priming

Pump Easy priming of the fuel system after a service interval, eliminating the potential of fuel contamination.

Swivel, Collector, and Swing Motor Access

Large access openings provide easy serviceability of fittings and connectors. Oil level check is accessed on the platform.

Isolated Cooling Cores

Isolated cooling cores can be individually removed, reducing service times.

More Productive

The new Prentice C Series is more fuel efficient and productive than the previous models. In controlled lab tests, the 2384C was 22% more productive than the 2384B. You can move more wood and lower your cost per ton.

Fuel Efficient

A choice of operating modes gives you the flexibility to match hydraulic power to the job. For normal loading operations, the Economy Mode provides fast cycle times and the most fuel-efficient performance.

Designed for Logging Applications

The booms and base structures are specifically designed for loading and delimbing applications, providing the strength and durability that allows for a long service life.

Product Link™

Allows tracking of operational parameters to ensure optimum utilization and on time service intervals

Automatic Idle Down

The loader control system includes an automatic engine idle down feature to reduce fuel consumption during periods of inactivity.

Specifications

Model 2484C
Engine Cat® C6.6 ACERT™ Tier 4 Interim
Gross Power 129.5 kW (174 hp)
Standard Boom Length 9.8 m (32 ft.)
Operating Weight 16,582 kg (36,480 lb)

-

Engine
2484C
Engine Model Cat C6.6 ACERT
Gross Power @ 1,800 rpm 129.3 kW 173 hp

-

Weights
2484C
Operating Weight without grapple 16 582 kg 36,480 lb
Counterweight 653 kg 1,440 lb

-

Hydraulic System
2484C
Hydraulic Oil Flow @ 1,800 rpm 230/230 L 60/60 gal
Hydraulic Pressure - System 24 131 kPa 3,500 psi
Hydraulic Pressure - Swing 24 131 kPa 3,500 psi
Cylinders - Main two
Cylinders - Stick one
Cylinders - Stabilizers four

-

Operating Specifications
2484C
Maximum Reach (standard boom) 9.8 m 32.0 ft
Swing Torque 100 360 N·m 73,800 lbf-ft
Swing Speed 9.5 rpm
Tailswing 2750 mm 108.2 in
Swing Bearing Diameter (ball path) 1105 mm 43.5 in

-

Service Refill Capacities
Swing Drive 4 L 1.0 gal
2484C
Fuel Tank 378 L 100 gal
Hydraulic Tank 302 L 80 gal
Engine Oil 15 L 4 gal
Cooling System 29 L 7.5 gal
Swing Drive 10 L 2.6 gal

-

Dimensions
2484C
Height to Top of Cab 4112 mm 161.9 in
Stabilizer Spread at Grade 4670 mm 183.8 in
Stabilizer Spread at Maximum Down
Reach
4237 mm 166.8 in
Stabilizer Reach Below Grade 324 mm 12.8 in
Stabilizer Pad Size 508 ×
711 mm
20 ×
28 in
• 2384C dimensions are on the non-suspension trailer.
• 2484C dimensions are on suspension trailer

-

Standards
2484C
OFPS cab meets SAE J2267

-

Shipping Dimensions (mounted trailer)
2484C
Width 2573 mm 101.3 in
Height 4112 mm 161.9 in

Would you like more information?