New Holland C237 / NOT AVAILABLE

Double tap to zoom

 

Features

  • READY FOR THE FARM, RENTAL YARD, AND CONSTRUCTION SITE 
    The NEW C237 is a vertical lift compact track loader that provides exceptional lift capacity with an efficient 74 horsepower engine. Lift more hay bales, haul heavier pallets and bigger boulders with greater breakout force and 3,700 lbs of rated operating capacity (50% ROC).

    Lift more on the farm or the job site

    – 74 HP engine 
    – 3,700-lb rated operating capacity @ 50% tipping load (7,400-lb tipping load) 
    – Long track base of 64.5 inches (17.7-inch wide tracks) 
    – Low ground pressure of 4.3 psi 
    – Strong bucket tip and lift breakout forces of 7,360 lbs and 6,110 lbs respectively with 78-inch dirt and foundry bucket

    Super Boom® vertical lift design

    The C237 design is optimized for lift and carry operations. The patented New Holland Super Boom® vertical lift linkage offers more height and reach which allows operators to load material into the center of high-sided truck boxes or hoppers.

    Heavy-duty construction

    The C237 is built with a heavy-duty steel rear door, steel rear hood, and NEW steel front work lights with side lamps for extra visibility during nighttime operation.

Specifications

Engine


Manufacturer/model FPT/ F5BFL463A*F001
Bore/stroke, in (mm) 3.9 x 4.3 (99 x 110)
Displacement, in3 (L) 207.5 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp (kW) 74 (55) @ 2,500 rpm
Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2,500 rpm
Peak torque, lb-ft (Nm) 232 (314) @ 1,400 rpm

 

Power Train


Travel speed, low range, mph (km/h) 5.1 (8.2)
Travel speed, high range (optional), mph (km/h) 8.0 (12.9)

 

Dimensions


HEIGHT TO
Bucket hinge pin, in (mm) 131.6 (3.34 m)
Top of ROPS, in (mm) 80.4 (2.04 m)
Bottom of level bucket, fully raised, in (mm) 124.8 (3.17 m)
Overall length without attachment with coupler, in (mm) 117.9 (3.0 m)
Dump angle, degrees 53.5
Dump reach (max height), in (mm) 35.1 (0.80 m) @ 45.0 degrees
Rollback, bucket on ground, degrees 34.2
Rollback, bucket at full height, degrees 86.0
Track on ground, in (mm) 64.5 (1.64 m)
Ground clearance (bottom of belly pan), in (mm) 9.5 (0.24 m)
Angle of departure, degrees 32.0
Clearance circle without bucket, in (mm) 58.5 (1.49 m)
Clearance circle rear, in (mm) 67.0 (1.70 m)
Overall width, in (mm) 76.0 (1.93 m)
Ground pressure, PSI (with spec belt) 4.2 psi (29 kPa)

 

Hydraulic System


Pump flow, gpm (Lpm) 24.2 (91.5)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Relief pressure, psi (bar) 3,046 (210)

 

Performance Specs


Rated operating load, 50% tip, lbs (kg) 3,700 (1678)
Rated operating load, 35% tip, lbs (kg) 2,590 (1178)
Tipping load, lbs (kg) 7,400 (3357)
Breakout force, lift cylinder, lbs (kN) 6,292 (28.0)
Breakout force, bucket cylinder, lbs (kN) 8,776 (39)
Operating weight, lbs (kg) Unit equipped w/ open cab; 165 lb operator; 78 in Heavy Duty bucket; full of fuel: 9,630 (4370)

Would you like more information?