Snow Plow Blades


WHEEL LOADER SNOW PLOWS, BLADES AND PUSHERS

Snow removal attachments for snow removal operations. When the snow starts to accumulate, Kenco snow plows, blades, and pushers are designed to get the job done.

RUNWAY PUSHER

Kenco Runaway Pusher

The Kenco Runway Pusher clears snow from airport runways. Snow plow pushers are available in “straight blade” design and are manufactured in 5-foot increments starting at 15 feet up to 30 feet. It utilizes bolt-on wings on each end of the blade to eliminate windrows, PLUS a rubber flap bolted to the top of the blade to prevent “blow-over” of snow that affects operator visibility during high-speed clearing.

  • Reinforced by vertical and horizontal moldboard ribs
  • Wear-resistant drilled base edge
  • Bolt-on moldboard end plates
  • Proven moldboard curvature

_

SNOW BLADE

Kenco Snowblade 2Kenco Snowblade 1

The Kenco Snow Plow Blade makes short work for snow removal in parking lots, driveways, and sidewalks.

Model# SB101
Blade Desc. 20″ X 36″
Cylinders 2 X 3″
Mounting Pin-On or QC w/ Tie Rods
Blade Parts Curb Protectors, Corner Flags
Trip Mech. 2 Trip Mech. 4 Springs
Max Angle/ Coverage 30 degrees, 104″

_

Model# SB12
Blade Desc. 144″ X 48″
Cylinders 2 X 3″
Mounting Pin-On or QC w/ Tie Rods
Blade Parts Curb Protectors, Corner Flags
Trip Mech. 2 Trip Mech. 4 Springs
Max Angle/ Coverage 30 degrees, 104″

_

Model# SB14
Blade Desc. 168″ X 54″
Cylinders 2 X 4″
Mounting Pin-On or QC w/ Tie Rods
Blade Parts Curb Protectors, Corner Flags
Trip Mech. 2 Trip Mech. 4 Springs
Max Angle/ Coverage 30 degrees, 104″

Would you like more information?