Generac Mobile Products MTP6SZ 6" Wet Prime Trash Pump

POWERFUL & DURABLE

• High efficiency pump end with best-in-class, lowest suction/discharge height
• Handles solids up to 3 in. (76.2 mm) in diameter
• Durable steel roll cage protects pump radiator and other components from damage
• Run-Dry system for continuous operation without need for external flush water or venting

EASY TO USE

• Designed for easy service and maintenance
• LOFA CP750 digital controller with large, back-lit LCD display
• Automatic start/stop control for use with two-switch inputs

ADDITIONAL FEATURES

• Final Tier 4 Engine
• Built-in containment for all engine fluids
• Four-corner leveling for stability and complete fuel usage
• Pad-lockable battery box
• Flip tongue no-weld, removable front plate hitch assembly

ENGINE

• Deutz TD 2.9 L4 – water-cooled, turbo-charged diesel engine
  o 75 hp @ 2600 rpm
  o 4 cylinder o 2.9 Liter displacement
  o DOC only for exhaust after treatment
  o EPA Final Tier 4 approved
  o Steel, single wall fuel tank 
     • 113 gal. (428 L) capacity / 100 gal. (379 L) usable 
• Fuel consumption at prime: 100% - 3.27 gph (12.4 Lph)
• Cooling system capable of operating at 120ºF (49ºC) ambient
• Disposable air filter – paper element 
• 950 CCA wet cell battery 
• 95 Amp alternator 
• Low coolant warning/shutdown

PUMP

• Cornell 6STX Self Prime Centrifugal Pump 
• 6.00” NPTF – suction & discharge connection 
• Ductile Iron ASTM A536, 65-45-12 volute casing 
• Ductile Iron ASTM A536, 100-70-03 impeller 
• Self-cleaning wear plate – mild steel
• Impeller is a 2 vane, semi-open design 
• Single mechanical seal, John Crane Type 2, with tungsten carbide vs silicon carbide faces 
• Replaceable wear plate 
• Pump shaft – 17-4 PH Stainless steel  

PUMP PERFORMANCE 

• Pump maximum output – 1680 gpm (6,359 Lpm) 
• Lift suction – 28 ft. (8.5 m) 
• Maximum diameter of solids – 3.00” (76.2 mm)  
• Impeller diameter: 12.38 inches (cm)
• Maximum Efficiency (BEP Percent) – 62%  
• BEP Flow – 1280 gpm (4,845Lpm) @ 110ft. TDH 
• Total dynamic head – 170 ft. (m)
• Duty Points: 
  o 1054 gpm @ 76.0-ft TDH @ 1500 RPM, 62% efficiency, NPSHR 12.9 ft. 
  o 1469 gpm @ 112.0-ft TDH @ 1900 RPM, 62% efficiency, NPSHR 22.3 ft.  

SYSTEM CONTROLS

• White LED lighting control panel lighting
• Standard controller – LOFA CP750
  o Large, backlit 4.3 in. (109 mm) LCD display 
     • Displays engine temp, engine speed, fuel level, engine hrs., coolant temp, and oil pressure
  o Advanced automatic start/stop control for use with two-switch inputs and 4-20mA transducer
  o Configurable high and low set points control start/stop operation
  o Alarm output to signal start warning or shutdown conditions
  o Heavy-duty IP64 water-resistant key switch with booted key
  o RS485 serial interface for auxiliary equipment
  o Electronic e-stop with red LED engagement indicator light

TRAILER

• Flip-tongue design
• Bolt-on, replaceable front tongue mounting plate
• DOT approved LED tail, side, brake, and directional lights
• (4) transportation tie downs capable of handling 3 in. (76.2 mm) trailer straps 
• Safety chains with spring loaded safety hooks
• 2 in. (50.8 mm) adjustable ball hitch
• 6000 lb. (2722 kg) torsion axle with surge brakes
• 2000 lb. (907 kg) tongue jack with footplate 
• (2) 2000 lb. (907 kg) top wind jacks, with option to add up to (4)
• ST225/75R15 tubeless tires – 8 ply 
• UV & fade resistant, high temperature cured, black polyester power paint
• Central lifting point 
• Document holder with operating manual including the AC/DC wiring diagrams

WEIGHT & DIMENSIONS

• Trailer Mounted
  o Dry weight:  3,914 lbs. (1,775 kg)
  o Operating weight:  4,728 lbs. (2,144 kg)
  o Dimensions:  150.12 x 75.00 x 73.88 in. (3.81 x 1.91 x 1.88 m)
• Skid Mount
  o Dry weight:  3,294 lbs. (1,494 kg)
  o Operating weight:  3,488 lbs. (1,582 kg)
  o Dimensions:  91.16 x 66.60 x 61.50 in. (2.32 x 1.69x 1.56 m)